Mosquito® Conduct 1.75 CR-10 V2 8 Degrees Stepper

8 Degrees Stepper

if find spring is too loose due to a fixed limit switch

[ Some printer will require a different part cooling setup due to the lower nozzle location ]

au/en/support/solutions/articles/51000372824-how-to-replace-toolhead-hotend-on-ender-3-neo-series

Processor ATSAMV71Q20B alternatively the ATSAME70Q20B will be used

Mosquito® Conduct 1.75 CR-10 V2 8 Degrees StepperSo this hotend is a little bonkers. It's tiny, lightweight, and doesn't directly use a fan! We consolidated the cooling by conducting heat to a small bearing bronze heat sink at the top that we call a "Base". The conduction heat break of the Mosquito Conduct doesn't have cooling fins and is designed instead to only use conductive heat transfer to prevent heat creep. Even with no fins and its small size, the Mosquito Conduct can still print up to 500C