OMC 0982406 0910211 Stringer 800 Hydro-Mechanical Lower Unit Gear Set 1979-81 Exhaust Manifold This was off 1994 GTX

This was off 1994 GTX Three Seater with a 657 Bombardier

micro-pitting on the chrome This is a stock photo

Also has the same style shift shaft

This would have been found on all of the standard OMC Cobra models 1990-1993 regardless of engine configuration

Intermediate housing Bearing Retainer & Seal Assembly Cover Plate part number is 981554 / 0981554 Stamped 909511 (Or sometimes 2-909511 or 1-909511) The pressed-on Oil Seal on this bearing carrier SHOULD probably be replaced

OMC 0982406 0910211 Stringer 800 Hydro-Mechanical Lower Unit Gear Set 1979-81 Exhaust Manifold This was off 1994 GTXPart Number(s) Included 982406 0982406 Forward Gear & Pinion (6 Jaw) 910211 0910211 Reverse Gear (3 Jaw) General Application Compatibility This would have been used with the LARGER OMC Stringer V6 & V8 Hydro Mechanical Shift 800 Lower units 1979 1981 1978 Models used a completly different Gear Set as far as the clutch dog & Reverse Gear were concerned. Not found on the 4cyl "400" Series Drives. The easy way to tell between a mechanical shift & hyrdo