3M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043043) 2 Channels Dry Contact Output plug the two terminals of

plug the two terminals of each of the four linear actuators into the two ports of CH1

Operating Voltage: 12V (1 x 27A -12V battery

150±20mm/s (The actual working speed will gradually slow down as the load increases

Unit size: 110mm x 50mm x 18mm

If you connect a brushed DC motor to this receiver

3M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043043) 2 Channels Dry Contact Output plug the two terminals ofThe six core power cable of the electric linear actuator type A, B or J with hall effect sensor is only 1. 5 meters. If you need a longer power cable, please purchase this extension cable. This extension cable is 3 meters long, it has a female plug and a male socket, you can use it to extend the distance between the linear actuators and synchronization controller. If you want to extend the distance between 1 linear actuator and synchronization